Below are the coordinates that align GSX with the Project Airbus A320 aircraft. Just input these coordinates into the aircraft settings in GSX. If you have any issues with this configuration, please post them in the comments. Thank you.
----- A320 -----
Passenger Door #1
Door with open/close checks as FSX Door #1
Name Front Passenger Door
Position (m) -2.25 11.46 3.60
Angle (deg) 0.00
Passenger Door #2
No Door
Passenger Door #3
No Door
Passenger Door #4
Door with open/close checks as FSX Door #3
Name Rear Passenger Door
Position (m) -2.00 -13.20 3.75
Angle (deg) -9.00
Service Door #1
Door with open/close checks as FSX Door #4
Name Front Service Door
Position (m) 2.25 11.46 3.75
Angle (deg) 0.00
Service Door #2
Door with open/close checks as FSX Door #4
Name Rear Service Door
Position (m) 2.00 -13.20 3.75
Angle (deg) 9.00
Cargo Door #1
Door with open/close checks as FSX Door #2
Name Front Cargo Door
Position (m) 0.94 8.40 2.22
Angle (deg) 0.00
ULD Code BELT
Cargo Door #2
Door with open/close checks as FSX Door #2
Name Rear Cargo Door
Position (m) 0.94 -6.15 2.22
Angle (deg) 0.00
ULD Code BELT
Deicer In
Position 3.14 0.02 3.50
Deicer Out
Position 16.42 -4.84 4.36
Fuel Position 9.00 -1.38 3.48